Soul L4-20L (2010) Steering and Suspension Sensors and Switches - Wheels and Tires
3. Engage the shoe and make sure that 20cm is maintained between the cross point and the valve. The arrow shows the direction of rotation of the
wheel.
4. Turn the wheel in order to engage all the first side of the tire.
NOTE:
The standard shoes can pass over the sensor without damaging it.
5. Put the second side of the tire in position, so that the cross point of the belt with the rim is approximately 20 cm away from the valve (see the
picture). The curved arrow shows the direction of rotation of the wheel.
6. Turn the wheel in order to engage all of the second side of the tire.
NOTE:
The standard shoes can pass over the sensor without damaging it.