Soul L4-2.0L (2010)
(1) Remove the split pin(A).
(2) Remove the castle nut(B).
(3) Disconnect the ball joint(C) from knuckle using the special tool (09568-4A000 or 09568-2J100).
Tightening torque:
16 - 34 N.m (1.6 - 3.4 Kgf.m, 12 - 25 lb.ft)
7. Remove the driveshaft nut (A) from the front hub.
Tightening torque:
240.2 - 269.6 N.m (24.5 - 27.5 Kgf.m, 177.2 - 197.9 lb.ft)
CAUTION:
-
The driveshaft lock nut should be replaced with new ones.
-
After installation driveshaft lock nut, stake the lock nut using a chisel and hammer as shown in the illustration below.
8. Remove the lower arm(A) from the knuckle.
Tightening torque:
60 - 72 N.m (6 - 7.2 Kgf.m, 43 - 52 lb.ft)