Spectra5 L4-2.0L (2005)
12. Install the flange and crankshaft pulley (A), and then tighten crankshaft pulley bolt (B).
Make sure that the crankshaft sprocket pin fits into the small hole in the pulley.
Tightening torque: 166.7 - 176.5 Nm (17 - 18 kg-m, 123.0 - 130.2 ft. lbs.)
13. Install the timing belt upper cover (A) with 4 bolts (B).
Tightening torque: 7.8 - 9.8 Nm (0.8 - 1.0 kg-m, 5.8 - 7.2 ft. lbs.)
14. Install the water pump pulley and 4 bolts.
15. Install the power steering pump drive belt.
16. Install the air conditioner compressor drive belt.
17. Install the alternator drive belt.
18. Tighten the bolts of water pump pulley.
19. Install the engine mounting support bracket.
1) Install the engine mounting support bracket stay plate (A) with bolt (B).
Tightening torque: 42.2 - 53.9 Nm (4.3 - 5.5 kg-m, 31.1 - 39.8 ft. lbs.)
2) Install the engine mounting support bracket (A) with nuts (C, D) and bolt (B).
Tightening torque:
Nut (D): 68.6 - 93.2 Nm (7.0 - 9.5 kg-m, 50.6 - 68.7 ft. lbs.)
Nut (C) and bolt (B): 49.0 - 63.7 Nm (5.0 - 6.5 kg-m, 36.2 - 47.0 ft. lbs.)
