Spectra5 L4-2.0L (2005)
18.
Remove the blue terminal pack retainer from the connector.
19.
Release the two lock tabs at the top of the blue terminal pack and slide out of the main connector.
20.
Release the terminal lock tabs on the side of terminal pack to remove the terminals # 19 (White) and # 41 (Blue with orange stripe). The terminal
lock tabs are on the side of the silver terminal located through the small windows in the side of the terminal pack
21.
Repeat steps 10 through 13 on the # 19 and # 41 terminals (# 19 White shown).
NOTICE:
-
Prepare the two PCM terminal wires from the repair kit.
-
To avoid mixing up the two PCM wires it may be helpful to replace the terminals and install them in the PCM connector one at a time.
