Spectra5 L4-2.0L (2005)
22.
Fit the new terminals into each terminal cavity and install the connector pack into the connector housing securely. Install the blue terminal pack
retainer removed in step 18. Wrap electrical tape around the wiring harness and place a small wire tie around the connector cover to secure it to
the harness.
23.
Slide the wiring harness down 0.8 inches through the wire tie at the PCM bracket (H) to relax the bend at the PCM connector and reconnect PCM
connector. Reinstall the wire tie clip in the PCM bracket.
-
Connect battery cable
-
Reset radio stations
-
Reinstall hood release cable
-
Start engine and verify proper operation with no MIL on.
WARRANTY CLAIM INFORMATION
