Spectra5 L4-2.0L (2005)
6. Remove the SRSCM mounting bolts (A) from the SRSCM and pull out the SRSCM from the bracket.
Tightening Torque (SRSCM Mounting Bolt) : 8 - 10 N.m (5.9 - 7.4 lb.ft)
INSTALLATION
1. Disconnect the negative (-) cable from battery and wait for at least three minutes.
2. Remove ignition key from the vehicle.
3. Install a SRSCM on the bracket with the three mounting bolts.
Tightening Torque (SRSCM Mounting Bolt) : 8 - 10 N.m (5.9 - 7.4 lb.ft)
4. Connect the SRSCM harness connector.
5. Install the center console.
6. Connect the DAB, PAB, SAB, CAB and BPT connectors.
7. After installing the SRSCM, confirm proper system operation:
A. Turn the ignition switch ON; the SRS indicator light should blink for about six seconds and then go off.
