Spectra5 L4-2.0L (2005)
5. Remove the white plastic cover from the top of the brake cable plunger slot. With the vehicle in park and foot off of the brake, check for
interference between the end of the brake cable plunger and the key lock cable lever as shown. The brake cable plunger must move freely past the
key lock cable end and touch the middle of the key lock cable lever as shown in the picture.
6. Correct interference between the end of the brake cable plunger and the key lock cable lever by moving the key lock and brake cable base plate.
Loosen the two 10mm nuts and slide the black base plate forward until the key lock cable lever moves out of the way of the brake cable plunger
allowing it to slide all the way back until it hits the middle of the key lock cable lever as shown in the picture. Replace the brake cable plunger
cover and tighten 10mm nuts.
VERIFICATION OF ADJUSTMENT
Operation of the key lock function must be checked before installation of the center console.
