Spectra5 L4-2.0L (2005)
Clutch Disc: Service and Repair
Clutch Cover And Disc
Components
REMOVAL
1. To remove the transaxle assembly, first drain the clutch fluid and transaxle gear oil, then remove the air cleaner joint and the mounting bracket etc.
2. Remove the clutch release lever (A).
(1) Loosen the release lever nut and washer.
(2) Remove the clevis pin and snap ring from the release cylinder.
(3) Remove the release lever (A).
NOTE:
1) It is impossible to remove the transaxle assembly without performing this step because the clutch cover assembly, release bearing and
release fork are held together.
2) To reduce rattling noise from the gear, a new dual mass flywheel has been used. Due to the application of the dual mass flywheel, the