Spectra GSX L4-1.8L (2000)
General Module: Diagram Information and Instructions
Circuit Schematics
Each schematic is arranged so current flows from power at the top of the page, to ground at the bottom. The "HOT" labels (1) at the top of a fuse tell you
when the ignition switch supplies power to that fuse.
Each circuit is shown completely and independently in one schematic. Other circuits getting their power from the same point, grounding at the same
point, are not shown. However, if other circuits actually share some wires, those wires will be shown also.
Wires that connect to another circuit are shown with an arrowhead pointing in the direction of current flow. Next to the arrowhead (2) is the name of the
circuit or component that shares that wiring. You can quickly check shared wiring by checking the operation of components.
