Sportage 2WD L4-2.0L (1997)
5. Hold the one-way clutch and turn the planetary sun gear. The planetary sun gear should turn freely counterclockwise, and lock clockwise.
6. Install the piston inner O-ring and piston outer O-ring onto the second brake piston, then install the second brake piston into the center support
assembly as shown.
NOTICE:
-
Always use new O-rings and apply ATF before installation.
-
When installing an O-ring, make sure that it is not pinched or twisted.
7. Install the second brake piston return springs and the return spring seat.
NOTICE: When installing the brake piston return springs, ensure that the springs are positioned correctly before compressing them.