Sportage 2WD L4-2.0L DOHC (1996)
6.
Re-install the inside door handle onto the inside door handle rod, then secure the retaining clip.
7.
Vehicles Equipped with Power Door Locks:
Reattach the power door lock actuator rod to the power door lock actuator, then secure the retaining clip.
8.
Close the door and verify that the outside door handle free-play is correct. If free-play is not within specification, repeat step 4 to readjust the
outside door handle rod.
Outside Door Handle Free-Play:
0.125-0.250 in (3.2-6.4 mm)
9.
Re-install the plastic door liner in its original position on the rear door.
10.
Slip the inside door handle through the rear door trim panel, then connect the power window switch harness connector to the power window
switch.
11.
Align the door lock knob with the slot in the rear door trim panel and slide the door panel down onto the rear door.
Notice:
Insure that the rear door trim panel is positioned correctly on the rear door, then press in around the perimeter of the trim panel to re-install the
retaining clips into the rear door
