Sportage 2WD L4-2.0L DOHC (1996)
5.
Attach the door lock knob rod to the door lock knob crank lever and secure the retaining clip, then reattach the door lock knob rod to the black
plastic guide clip.
Notice:
Failure to attach the door lock knob rod to the black plastic guide clip will result in poor inside door lock knob operation.
6.
Re-install the inside door handle onto the inside door handle rod, then secure the retaining clip.
7.
Vehicles Equipped with Power Door Locks:
Reattach the power door lock actuator rod to the power door lock actuator, then secure the retaining clip.
8.
Close the door and verify that the outside door handle free-play is correct. If free-play is not within specification, repeat step 4 to readjust the
outside door handle rod.
Outside Door Handle Free-Play:
0.125-0.250 in (3.2-6.4 mm)
9.
Re-install the plastic door liner in its original position on the rear door.
10.
Slip the inside door handle through the rear door trim panel, then connect the power window switch harness connector to the power window
