Sportage 2WD L4-2.0L DOHC (1996)
Tightening torque: 27-38 ft.lbs. (37-52 Nm, 3.8-5.3 kg/m)
9. Check the timing belt deflection. If the deflection is not correct, loosen the tensioner lock bolt and repeat steps 5-7 above. Replace the tensioner
spring if necessary.
Belt deflection: 0.30-0.33 in. (7.5-8.5 mm)122 lbs. (98 N 310 kg)
10. Install the lower timing belt cover and two bolts.
Tightening torque: 61-87 in.lbs. (7-10 Nm)
11. Install the upper timing belt cover and five bolts.
Tightening torque: 61-87 in.lbs. (7-10 Nm)
12. Install the power steering drive belt and set belt deflection.
Power Steering Belt deflection:
New: 0.31-0.39 in. (8-10 mm)
Used: 0.35-0.43 in. (9-11 mm)
13. Tighten the lock bolt (A) and mounting bolt (B).
Tightening torque: 27-34 ft.lbs. (37-46 Nm)
14. Install the tan pulley.
