Sportage 2WD L4-2.0L DOHC (1996)
Starter Motor: Service and Repair
NOTE: On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
1. Disconnect battery ground cable.
2. Remove two upper bolts from intake manifold bracket.
3. Raise and support vehicle.
4. Remove bolts on the clutch release cylinder and push aside.
5. Remove two lower intake manifold bracket bolts.
6. Remove intake manifold bracket.
7. Remove two upper starter bolts.
8. Remove lower starter bolt.
9. Disconnect starter from flywheel housing and support starter in place.
10. Lower vehicle.
