Sportage 2WD L4-2.0L DOHC (1996)
a. Position the glass carefully. Hold the glass from both its inner and outer surfaces, and while tilting it toward the hinge side of the door, place it
on the small bracket on the power window regulator assembly.
b. Install two glass mounting bolts on power window regulator assembly loosely.
c. Reconnect window operating switch.
d. Connect negative battery cable.
e. Turn on the ignition and move the glass up and down to ensure proper function.
f.
Make adjustments as necessary.
g. Turn off the ignition.
h. Disconnect negative battery cable.
i.
Tighten two glass mounting bolts on the power window regulator assembly.
Tighten the two mounting bolts to 53 lb-in (6 N.m).
j.
Tighten one bolt on the glass guide.
Tighten one bolt to 84 lb-in (9.5 N.m).
5. Install the plastic door screen.
a. Fasten the plastic door screen as originally installed.
b. Pull out the electrical harness connector from the plastic door screen.
c. Pull out the remote control rod for the inner door handle from the plastic door screen.
