Sportage 2WD L4-2.0L DOHC (1996)
4.
Carefully slip the inside door handle through the door panel opening.
5.
Disconnect the power window switch connector and set the door panel aside in a safe place on a clean surface.
6.
Carefully pull the plastic vapor barrier away from the rear door starting from the rear upper corner of the rear door until the center channel lower
bolt is completely accessible.
NOTICE
Do not tear or damage the plastic vapor barrier.
7.
Using a suitable flat blade screwdriver, carefully pry the inner door glass weatherstrip up away from the door and set it aside.
NOTICE
Excessive pulling on the weatherstrip will cause the weatherstrip to bend which will result in the need for weatherstrip replacement.