Sportage 2WD L4-2.0L SOHC (1995)
Notice:
Do not remove the inner door glass weatherstrip at this time.
4.
Carefully slip the inside door handle through the door panel opening.
5.
Disconnect the power window switch connector and set the door panel aside in a safe place on a clean surface.
6.
Carefully pull the plastic door liner away from the rear door starting from the rear upper corner of the rear door until the rear door lock assembly is
completely exposed.
7.
Using a suitable flat pry bar, carefully pry the inner door glass weatherstrip away from the door and set it aside.
Notice:
Excessive pulling on the weatherstrip will cause it to bend which will require weatherstrip replacement.