Sportage 2WD L4-2.0L SOHC (1995)
12.
Re-install the retaining screws into the inside door handle and the inside pull handle, then re-install the inside pull handle screw cover.
13.
Re-install the inner door glass weatherstrip by aligning the notch in the weatherstrip with the rear door glass run channel. Beginning at the front
edge of the door, press down evenly on the weatherstrip until it is correctly positioned on the rear door.
14.
Verify the operation of the rear door lock using both the inside and outside door handles.
15.
Verify the manual and power (if equipped) door lock operation.
