Sportage 2WD L4-2.0L SOHC (1995)
Fig. 14 Valve Cover Replacement
12. Remove two screws from high tension cord protectors on valve cover, Fig. 14.
13. Remove oxygen sensor wire loom from holder at rear of valve cover.
14. Remove vacuum tube from vacuum pipe at rear valve cover.
15. Remove two vacuum pipe mounting bolts.
16. Remove vacuum pipe.
17. Remove seven valve cover bolts.
18. Remove valve cover and gasket.
19. Reverse procedure to install. Tighten cylinder head cover bolts to specifications.
20. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
