Sportage 2WD L4-2.0L SOHC (1995)
Rocker Arm Assembly: Service and Repair
1. Remove camshaft pulley.
2. Remove cylinder head cover.
3. Remove top bolt on front housing.
4. Measure camshaft endplay. Normal endplay is 0.003-0.006 inch. Maximum endplay is 0.008 inch.
Fig. 15 Rocker Arm Assembly Bolt Removal
5. Loosen rocker arm assembly bolts in order shown in Fig. 15, but do not remove.
6. Remove rocker arm and shaft assembly together with bolts.
7. Reverse procedure to install.
