Sportage 2WD L4-2.0L SOHC (1995)
Heater Core Case: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. Chock wheels.
2. Drain engine coolant and remove heat unit. Refer to Heater Unit/Removal.
3. Detach dash seal from the heater core tube connections.
4. Remove the vent seal.
5. Remove two screws attaching wire harness to the heater servo mechanism.
6. Remove eight retaining clips from the servo side (left side) of the heater unit.
7. Remove the left side of the heater unit.
8. Remove six retaining clips holding the remaining two sections of the heater unit together.
9. Remove four screws retaining the heater core tube mounting bracket.
10. Take off the core tube mounting bracket.
11. Disassemble the heater unit by removing the eight remaining retaining clips.
