Sportage 2WD L4-2.0L SOHC (1995)
Fuel Tank Unit: Service and Repair
Installation
Fuel Sender Assembly
Fuel Sender Assembly Removal
INSTALLATION
WARNING: Fuel is explosive. When working on fuel system parts, make sure to supply adequate ventilation to the work area. Do not smoke
and keep sparks and open flames away.
1. Remove any cap or protective cover from the port on the top of the fuel tank.
2. Holding the assembled fuel pump assembly, guide it into the access port on the top of the fuel tank as far as it will go at that point.
CAUTION: Do not force fuel pump assembly parts. The fuel screen is delicate and can be damaged by improper installation to the fuel tank.
3. While twisting very carefully and tilting the fuel pump assembly, push gradually on the assembly until it starts to go into position in the fuel tank
assembly.
4. Install eight screws around the top surface of the fuel pump assembly.
5. Connect the two fuel hose assemblies to the fuel pump assembly.
6. Install the two fuel hose clips to the two fuel hose assemblies connected to the fuel pump assembly.