Sportage 2WD L4-2.0L SOHC (1995)
Ignition Coil: Service and Repair
Coil
REMOVAL
1. Disconnect the negative battery cable.
2. Disconnect the 4 high tension leads.
3. Disconnect the ignition coil connector.
4. Remove the four ignition coil mounting bolts.
5. Remove the ignition coils.
INSTALLATION
1. Position the ignition coil so that the connector faces forward.
2. Insert and tighten the four ignition coil mounting bolts.
Tighten bolts to 14 - 22 lb ft (19 - 30 Nm)
3. Reconnect the ignition coil connectors.
4. Reattach the high tension leads.
-
Be certain to make connections correctly; leads are marked.
5. Reconnect battery cable.