Sportage 2WD V6-2.7L (2009)
Brake Pad: Testing and Inspection
Front Disc Brake Pad
INSPECTION OF FRONT DISC BRAKE PAD
1. Check the brake pad thickness through the caliper body inspection hole
Pad thickness
Standard value : 11.0 mm ( 0.43 in.)
Service limit : 2.0 mm (0.0787 in.)
CAUTION:
-
If the pad lining thickness is out of specification, left and right pads must be replaced as a complete set.
-
When the thickness difference between the left pad and right pad is large, check the sliding condition of the piston and the guide rod.
