Sportage 2WD V6-2.7L (2009)
INSTALLATION
INTAKE MANIFOLD
1. Install the intake manifold and gasket.
Tightening torque
19 - 21N.m (190 - 210kgf.cm, 14 - 15lb-ft)
2. Install the injector assembly.
3. Install the surge tank assembly(A).
(1) Install the surge tank assembly.
Tightening torque
15 - 20N.m (150 - 200kgf.cm, 11 - 15lb-ft)
(2) Install the surge tank stay.
Tightening torque
15 - 20N.m (150 - 200kgf.cm, 11 - 15lb-ft)
(3) Install the ground cable.
(4) Connect the VIS actuator connector.
(5) Connect the IAT sensor connector.
(6) Connect the PCV hose.
(7) Connect the brake booster vacuum hose.
(8) Connect the PCSV hose.
(9) Connect the PCSV connector.
(10) Connect the injector connector.
(11) Connector the VIS actuator connector.
(12) Connector the ISA connector.
(13) Connector the TPS connector.
(14) Connector the actuator cable.
4. Install the air cleaner hose.
5. Install the engine cover.
