Sportage 2WD V6-2.7L (2009)
Exhaust Manifold: Service and Repair
Repair Procedures
REMOVAL
EXHAUST MANIFOLD
1. Remove the under cover(A).
2. Remove the front exhaust pipe(A).
3. Disconnect the oxygen sensor connector.
4. Remove the cooling fan motor assembly.
5. Remove the Air conditioner compressor.
6. Remove the LH heat protector(A).
7. Remove the LH exhaust manifold(A) and gasket(B).
8. Remove the alternator.
9. Remove the RH drive shaft.
10. Remove the RH heat protector.
11. Remove the RH exhaust manifold and gasket.
INSTALLATION
EXHAUST MANIFOLD