kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

Seat Belt Buckle Switch > < Front Impact Sensor (FIS)|Page 4199
Page 2
background image

Tightening torque
: 8.8 - 10.8 Nm(6.5 - 8.0 lb-ft)

2. Reinstall belt pretensioner.
3. Reconnect the negative battery cable.
4. After installing the side impact sensor, confirm proper system operation: Turn the ignition switch ON: the SRS indicator light should be turned on

for about six seconds and then go off.

Seat Belt Buckle Switch > < Front Impact Sensor (FIS)|Page 4199