Sportage 2WD V6-2.7L (2009)
15. Remove the oil seal(B) from the rack bushing(A).
16. Remove the pinion valve assembly(C) from the valve body housing(B) with a soft hammer(A).
17. Using the special tool, remove the oil seal and ball bearing from the valve body housing.
18. Remove the oil seal and O-ring from the rack housing.
CAUTION:
Be careful not to damage the pinion valve cylinder inside of the rack housing.
19. Using the special tool(06573-21200, 09555-21000), remove the oil seal(B) from the rack housing(A).
CAUTION:
Be careful not to damage the rack cylinder inside of the rack housing.
Inspection
INSPECTION AND ADJUSTMENT BEFORE DISASSEMBLY
CAUTION:
When mounting the gear box in a vise, ensure the gear box is mounted as shown in the following illustration to avoid damage.