Sportage 2WD V6-2.7L (2009)
3. Remove the lower arm ball joint mounting bolts(A).
4. Remove the lower arm mounting bolts(A).
REPLACEMENT
1. Using the special tools(09214-32000 & 09216-211000), remove the bushing from the lower arm.
2. Apply soap solution to the following parts.
A. Outer surface of the bushing.
B. Inner surface of the lower bushing mounting part.
3. Using the special tools(09214-32000 & 09216-21100), install the busing on the lower arm.
CAUTION:
Insert bushing in the direction as shown in the illustration.
Separation force is over 8000 N (800 Kgf, 1763 lbf)
