Sportage 2WD V6-2.7L (2009)
5. Remove the suspension arm(B).
6. Install the suspension arm bracket mounting bolts(A).
Tightening torque :
160 - 180 Nm (16 - 18 Kgf-m, 118.0 - 132.8 lb-ft)
7. Make sure that the arrow mark(B) on the rear cross member(A) should place the front face of the vehicle.
8. Rear suspension arm(C)-to-rear carrier bolts should be temporarily tightened, and then fully tightened with the vehicle on the ground in unloaded
condition.
Tightening torque :
160 - 180 Nm (16 - 18 Kgf-m, 118.0 - 132.8 lb-ft)