Sportage 2WD V6-2.7L (2009)
Front Subframe: Technical Service Bulletins
Body/Frame - Subframe Bushing Replacement
Model: Sportage [KM]
Group: Suspension System(21)
Number: KT2009110302
Date: Tuesday, November 03, 2009
Area: N. America
Subject
Procedure for Using Kias New Subframe Bushing
Remover and Installer for Sportage (KM) (SST - 019)
- Description
This Technical Service Bulletin provides instructions for using the bushing remover and installer. Tool bushings can be removed
and installed without removing the sub frame from the vehicle. The subframe will be lowered to access the top of the bushing
and provide space for the tool.
The repair procedure consist of 4 main operations:
1. Removing The Subframe Bushing
2. Removing The Outer Sleeve
3.
Inspecting Subframe
4. Installing the New Subframe Bushing
- Effective Vehicle Information
AFFECTED PRODUCTION RANGE:
All 2005 ~ 2010 Sportage (KM)
- Service Procedure
Service Procedure Lowering the Subframe to Replace the Rear Bushings
1. Pull back the carpet and remove the bolt that holds the U-Joint on the steering rack.
2. Lift up the U-Joint far enough to mark the location on the spline.
3. Install a steering wheel holder.
4. Lift the joint off the shaft.