Sportage 2WD V6-2.7L (2009)
4. Remove the speed sensor cable mounting bolt(B) and speed sensor(A).
5. Remove the nut(B) from the stabilizer bar link(A).
6. Remove the strut upper mounting nuts(A).
7. Remove the strut lower mounting bolts(A) and then remove the strut assembly(B).
INSTALLATION
1. Install the strut assembly(B) and then install the strut lower mounting bolts(A).
Tightening torque :
140 - 160 Nm (14 - 16 Kgf-m, 103.3 - 118.0 lb-ft)