Sportage 2WD V6-2.7L (2009)
100 - 120 Nm (10 - 12 Kgf-m, 73.8 - 88.5 lb-ft)
4. Install the speed sensor cable mounting bolt(A).
Tightening torque :
7 - 11 Nm (0.7 - 1.1 Kgf-m, 5.2 - 8.1 lb-ft)
NOTE:
Drum brake type :
Install the speed sensor cable mounting bolts(2EA) and the brake hose bracket.
Disc brake type :
Install the speed sensor cable mounting bolt(1EA)
5. Install the rear wheel and tire(A) on the rear hub(B).
Tightening torque :
90 - 110 Nm (9 - 11 Kgf-m, 66.4 - 81.2 lb-ft)
CAUTION:
Be careful not to damage the hub bolts(C) then install the rear wheel and tire(A).
Disposal
DISPOSAL
1. Fully extend the piston rod.
2. Drill a hole on the A section to remove gas from the cylinder.
CAUTION:
The gas coming out is harmless, but be careful of chips that may fly when drilling.
