Sportage 2WD 2Dr L4-2.0L (2002)
11. Remove the run channel.
Installation
1. Install the run channel. Use soap and water for lubrication.
2. Install the glass guide.
a. Position the glass guide as originally installed through the access hole.
b. Fasten the top clip on the glass guide to the metallic strip in the door frame as originally installed.
c. Install one bolt loosely.
3. Install power window regulator assembly
a. Position the power window regulator assembly as originally installed through the access hole.
b. Install six mounting nuts.
Tighten the six mounting nuts to 97 lb-in (11 N.m).
c. Connect the electrical connector for the power window motor.
4. Install window glass.