Sportage 2WD 2Dr L4-2.0L (2002)
Convertible Top: Service and Repair
Convertible Soft Top
Removal and Installation
Convertible Soft Top
Top Installation
1. Orient the top fabric with the vinyl side out and the long plastic strip along the front edge.
2. Drape the top over the rear of the vehicle.
3. Slide the plastic strip into the channel in the retainer along the roof.
NOTE: The fabric should be centered on the vehicle.
4. Raise the bow and fit it into the rear of the top.
5. Locate the snap four tabs sewn inside the top above the rear window opening.
6. Wrap the tabs around the rear of the bow and snap them to the bow.
