Sportage 2WD 2Dr L4-2.0L (2002)
1. Place pipe joint in position and insert mounting bolt.
Tighten bolt to 89 inch lbs. (10 Nm).
2. Reconnect flexible hose to pipe joint.
3. Place flexible hose in position and insert clip.
4. Connect flexible hose to brake line and tighten flare nut.
Tighten nut to 89 inch lbs. (10 Nm).
5. Place right rear brake line in position.
6. Connect right brake line to pipe joint and hand-tighten nut.
7. Connect right brake line to right rear brake assembly and hand-tighten nut.
8. Position brake pipe clamps and insert the three mounting bolts.
Tighten bolts to 89 inch lbs. (10 Nm).
9. Tighten brake line nuts.
Tighten nuts to 89 inch lbs. (10 Nm).
10. Place left rear brake line into position.
11. Connect left rear brake line to pipe joint and hand-tighten nut.
12. Connect left rear brake line to left rear brake assembly and hand-tighten nuts.
