Sportage 2WD 2Dr L4-2.0L (2002)
Camshaft Oil Seal
1. Apply a liberal amount of clean engine oil to the camshaft oil seal and cylinder head.
2. Install the camshaft oil seal.
Camshaft Cap
1. Apply a liberal amount of clean engine oil to the camshaft lobes and journals.
2. Apply silicon sealant to both front camshaft cap surfaces and the camshaft position sensor mounting cap.
3. Position the camshaft caps according to the cap the number with the arrows pointing toward the front of cylinder head.
Camshaft Cap Bolt Tightening Sequence
4. Install the camshaft caps. Tighten the bolts in two or three steps in the order shown in the figure.
Tightening torque: 13 - 20 ft. lbs. (18 - 26 Nm)
5. Install camshaft pulleys.
6. Install timing belt.