Sportage 2WD 2Dr L4-2.0L (2002)
7. Position the glove box and secure using two screws.
Tighten the two screws to 80 lb-in (9 N.m).
NOTE: Make sure there are no wires, connectors, or components pinched or pressured between the glove box and the dash panel.
8. Install the evaporator/blower motor assembly drain hose.
Fig. 11 A/C Evaporator Inlet & Outlet Line Connections
9. Connect the A/C pressure and suction lines to the evaporator core.
10. Charge the A/C system with refrigerant in accordance with the charging instructions.
11. Install the battery.
12. Attach the battery hold down.
13. Connect the positive and negative battery cables.
