Sportage 2WD 2Dr L4-2.0L (2002)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Removal
1. Remove the two bolts at the front of the fresh air duct.
2. Loosen the clamp between the air duct and the air cleaner housing.
Installation
1. Position the fresh air duct onto the air cleaner housing inlet.
Be sure the clamp is ON the duct.
2. Install the two mounting bolts at the front sides of the air duct.
3. Tighten the clamp on the duct at the air cleaner housing.
