kia Workshop Repair Guides

Kia Workshop Service and Repair Manuals

ABOUT US
Canister Close Valve <--> [Evaporative Check Valve] > < Canister Purge Solenoid|Specifications

Sportage 2WD 2Dr L4-2.0L (2002)

Page 1
background image

Canister Purge Solenoid: Testing and Inspection

Evaporative Emission (EVAP) Purge Solenoid Valve

Inspection

1. Disconnect the vacuum hoses from the purge control solenoid valve.

2. Verify that no air flows through the valve.
3. Disconnect the valve connector and apply 12 volt battery voltage as shown in the figure.
4. Verify that air flows through the valve.
5. If no air flows, replace the valve.
6. Reinstall the valve connector.

7. Reconnect the vacuum hoses onto the purge control solenoid valve.

Canister Close Valve <--> [Evaporative Check Valve] > < Canister Purge Solenoid|Specifications