Sportage 2WD 2Dr L4-2.0L (2002)
Intake Air Duct: Service and Repair
Air Funnel
Removal
1. Loosen the clamps on the air intake hose.
2. Remove the intake hose between the mass air flow sensor and the air funnel.
3. Remove the four smaller hoses joining the air funnel.
4. Remove the two mounting bolts for the air funnel.
5. Loosen the clamp at the intake elbow and remove the air funnel.
Installation
1. Position the air funnel and install the two mounting bolts. Tighten the bolts.
2. Tighten the clamps at the intake elbow.
3. Install the four hoses joining the air funnel.
4. Install the air intake hose between the air funnel and the mass air flow sensor.
5. Tighten the two clamps for the air intake hose.