Sportage 2WD 2Dr L4-2.0L (2002)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION SENSOR
Removal
1. Disconnect the cable from the negative battery terminal.
2. Raise the vehicle and support it with safety stands.
3. Disconnect the crankshaft position sensor connector.
4. Remove one bolt and pull the sensor straight out of the transmission housing.
Installation
1. Reinstall the crankshaft position sensor into the transmission with the bolt.
Tightening torque: 5 ft. lbs. (7 Nm).
2. Reconnect the crankshaft position sensor connector.
3. Lower the vehicle.
4. Reconnect the cable to the negative battery terminal.
