Sportage 2WD 2Dr L4-2.0L (2002)
Starter Armature: Specifications
Measure the runout with a dial indicator.
If the runout is not within specification, repair it with a lathe or replace the armature.
Runout:.................................................................................................................................................................................................... 0.002 in (0.05 mm)
Maximum: ................................................................................................................................................................................................. 0.016 in (0.4 mm)
Replace the armature if the outer diameter of the commutator is at, or less than, the grind limit.
Grind Limit: ...................................................................................................................................................................................................1.22 in (31 mm)
If the depth of the mold between segments is at, or less than, the minimum, replace the armature.
Depth: ...................................................................................................................................................................................... 0.02 - 0.03 in (0.5 - 0.8 mm)
Minimum: ................................................................................................................................................................................................. 0.008 in (0.2 mm)
