Sportage 2WD 2Dr L4-2.0L (2002)
3. Insert the stabilizer bar plate into the pivot link.
4. Align the stabilizer bar bushings with the installation position (white) line on the stabilizer bar.
5. Insert the stabilizer bar into the plate setting part and tighten the bolt two threads to connect the plate (and stabilizer bar) with the pivot link.
Notice: Apply lubricant on the stabilizer bar bushings.
6. Insert the stabilizer onto the drop link and tighten the nuts. Ensure that the head of the drop links are kept in the forward position.
Tighten the nuts to 36 ft. lbs. (48 Nm).
7. Install the stabilizer bar plate bolts.
Tighten the bar plate bolts to 18 ft. lbs. (25 Nm).
8. Install the pivot link bolts.
Tighten the pivot link bolts to 31 ft. lbs. (42 Nm).
9. Install the undercover.
