Sportage 2WD 4Dr L4-2.0L (2000)
Brake Master Cylinder: Service and Repair
Removal and Installation
NOTICE: Hydraulic fluid will damage paint. If fluid gets on a painted surface, wipe off immediately.
REMOVAL
1. Place a cloth under the master cylinder to prevent brake fluid from falling on painted surfaces.
2. Disconnect clutch fluid hose from back of master cylinder reservoir and drain reservoir.
3. Remove connector to fluid level and differential sensor.
4. Remove the brake lines from the master cylinder to the proportioning valve using a line wrench.
5. Remove the rear wheel brake line from the right side of the ABS solenoids using a line wrench.