Sportage 2WD 4Dr L4-2.0L (2000)
7. Apply 500 mmHg vacuum with a vacuum pump.
8. Put the master cylinder gauge Special Service Tools (SST) K95U-5200-B or equivalent, onto the vacuum booster unit with the top of the adjusting
bolt touching the push rod.
9. Check the clearance between the edge of the adjusting bolt and the push rod of the power brake unit
Permissible clearance: 0.004 - 0.012 inch (0.1 - 0.3 mm)
If not to specification, loosen the lock nut of the push rod, and turn the push rod to make the adjustment.
10. Install master cylinder and bracket assembly.