Sportage 2WD 4Dr L4-2.0L (2000)
Cruise Control Switch: Service and Repair
Cruise Main and Interior Light Dimmer Switches
Removal
1. Disconnect battery.
2. Press on instrument cluster switch mounting tabs while pushing on the switch until the tabs clear the trim.
3. Remove the switch from the trim.
4. Disconnect wiring.
5. Remove and replace the bulb unit as necessary. If the bulb and switch are one unit, remove and replace that bulb/switch unit as necessary.
Installation
1. Install the bulb unit into the switch as is applicable for the switch. If the bulb and switch are one unit install that unit.
2. Connect wiring.
3. Mount the switch in the mounting hole.
4. Push the switch into its mounting hole in the cover until the tabs snap into place.
