Sportage 2WD 4Dr L4-2.0L (2000)
Timing Belt: Service and Repair
Timing Belt Pulley
REMOVAL
1. Refer to Timing Belt Removal.
2. Remove the timing belt pulley lock bolt.
3. Remove the timing belt pulley.
INSTALLATION
1. Install the timing belt pulley with the mating marks aligned.
2. Position the guide plate as shown.
3. Install the lock bolt and tighten.
Tightening torque: 120 ft. lbs. (162 Nm)
4. Install timing belt as described in this section.