Sportage 2WD 4Dr L4-2.0L (2000)
23. Insert four screws to hold the blower inlet duct place.
Tighten the four screws to 62 lb-in (7 N.m).
24. Install the dash seal on the evaporator core tube connections.
25. Connect the servo control cable to the inlet duct servo.
26. Install the blower/evaporator unit.
27. Connect the drain hose.
28. Connect the A/C pressure and suction lines to the evaporator core.
29. Install the battery.
30. Attach the battery retaining bracket.
31. Attach the battery cables.
32. Evacuate and charge the A/C system. Refer to Recovery/Evacuating/Charging.
33. Check for leaks.
