Sportage 2WD 4Dr L4-2.0L (2000)
5. Connect the refrigerant lines to the receiver/drier.
Tighten line flare nuts to 10 lb-ft (13 N.m).
6. Evacuate the A/C system. Refer to Recovery/Evacuating/Charging. Perform vacuum test.
7. Charge the A/C system. Refer to Recovery/Evacuating/Charging. Add 1.0 oz (30 cc) of refrigerant oil if the receiver/drier has been replaced with a
new unit. Perform a leak test.
8. Connect the negative battery cable.
9. Start engine and run the A/C system. Check for leaks at the receiver/drier.
10. Remove wheel chocks.